JEEP JK WRANGLER REAR 1310 SERIES RUBICON OR NON CV DRIVESHAFT 2007-2018

Description

4x4PartSales
Visit Our Store
Follow Us
Feedback
Newsletters
Contact Us
ADAMS DRIVESHAFT JK REAR 1310 CV DRIVESHAFT GREASABLE U-joints [HEAVY DUTY SERIES]
Description
New Rear
Heavy Duty
Jeep JK Wrangler Rubicon or Non Rubicon 1310 Series CV Driveshaft with
Greasable
U-joints Custom made by Adams Driveshaft.
***Please Note: Depending on the size and manufacturer of your lift kit, rear upper adjustable control arms may be needed to help set the pinion angle***
Why not Buy from a Company that Owns, Lives, and Breathes Offroad vehicles like we do? We Test our Products on our own Jeeps to make sure the parts we are using hold up to the Pressure and Abuse that they are put through.
Application:
FITS 2007 thru 2018 JEEP JK WRANGLERS 2 or 4 DOOR MODELS.
This
Rear
Heavy Duty Series Greasable 1310 CV Driveshaft will work up to 35" Tall Tire's after that size we Recommend you upgrading to our [Extreme Duty 1310 Solid Series]. Bigger tires adds more Weight, Traction, and more Pressure on your Drivetrain Components like your Driveshafts, Axles, Gears, Etc so you want to make sure you are buying the right driveshaft for your Jeep.
We do know most of the measurements of your JK up to a 4 1/2" lift after that we would need a measurement.
Please note:
If you have a Rock Krawler X-Factor Lift Kit or Coil Over Lift Kit we would need you to get us a Measurement after the lift is installed.
Please e-mail us, the Year, Make, Model, Lift Size, or call us at 702-568-5680 between the hours of 8:00 am to 5:00 pm Pacific time Monday thru Friday after you have purchased the Item. If we don't have your Measurement we might need you to get us a measurement.
There is a Measurement Chart below showing you how we would like you to measure with the jeep sitting at Ride Height.
Benefits:
2 Door Driveshaft:
Part#
ASDJK-1310R-G2D
4 Door Driveshaft:
Part#
ASDJK-1310R-G4D
Made out of 2 1/2" X .083 Wall D.O.M. tubing that is
Double the Strength
of the Factory Tubing. Lifetime Warranty on the Welds and Tubing if Twisted by Torque.
Has a Longer Slip n Stub and a Double Lip Seal to help keep out Debris.
Built only with Components made by Spicer and Neapco.
Has Spicer Greaseable U-joints not Offshore U-joints with different color Seals.
Comes with an American Made Transfer Case Yoke with Grade 10 CV Bolts with small heads on them so they are easier to install and a Packet of Loctite.
Has an American Made Dana 44 Pinion Yoke and Heavy Duty 1310 U-Bolts.
This Item will include the following parts as Picture up Top:
[1] 2 1/2" X .083
Wall Heavy Duty 1310 CV Driveshaft with
Greasable
U-joints.
[1] American Made 1310 Rear Transfer Case Output Shaft Yoke.
[1] American Made 1310 Rear Dana 44 Pinion Yoke.
[1] Set of Heavy Duty 1310 U-bolts.
[1]
Set of Grade 10 CV Bolts. There is four bolts total and they have small heads on them so they are easier to install.
Driveshaft comes painted Gloss Black Show Quality.
Step by Step Installation Instructions Link:
https://www.adamsdriveshaftoffroad.com/rear-jk-install/
SHIPPING
PAYMENT
RETURN
TERMS & CONDITIONS
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations. We can ship any of the Driveshafts, and Gear Sets. You would need to send us a e-mail and give us the following Information: Product, and Full Address.
Standard shipping is to the Continental U.S. ONLY.
Please note: For Alaska, Hawaii, U.S. Territories & International orders, there will be additional shipping charges. Please call or e-mail for pricing.
On eBay We only Accept PayPal payment system.
Make sure your shipping address is correct before you checkout.
If the shipping is incorrect then as per eBay Policy we cannot change because of security reason.
Once the order dispatched we cannot change your shipping address and We are not responsible for item(s) and address you provided.
Adams Driveshaft provides measurement charts for reference to ensure proper fitment for your vehicle. Due to labor costs, parts, etc., Adams Driveshaft will have to start charging a 15% restocking fee for any driveshaft that is returned due to incorrect measurements, u-joint series, etc. that is no fault of Adams Driveshaft (Custom driveshafts that are returned, need to be re-machined and can no longer be sold as new). All new returns must be received within 30 days of purchase. All returns would need to have an RGA number in the event that you need to return your driveshaft for repair or warranty. Please call 702-568-5680 and we will issue an RGA number for you or if you have any questions and we’ll get you taken care of.
As a seller Positive Feedback is very important to us, as well as our customers. We want all our customers to be happy with there orders, If we have made an error we do apologize, we are only human, let us know so we can rectify it for you, please do speak with us before you leave us negative feedback we will do everything we can to make it right.
Categories
JL Lift Kits & Accessories
JK Lift Kits & Accessories
XJ Lift Kits & Accessories
YJ Lift Kits & Accessories
TJ Lift Kits & Accessories
Chevy/GMC Lift Kits
Dodge Lift Kits & Accessories
Ford Lift Kits and Accessories
Toyota Lift Kits & Accessories
ZJ Lift Kits and Accessories
WJ Lift Kits and Accessories
CJ Lift Kits & Accessories
JL Driveshafts
JK Driveshafts
TJ Driveshafts
XJ Driveshafts
YJ Driveshafts
LJ Driveshafts
CJ Driveshafts
Chevy/GMC Driveshafts
Sye and Driveshaft Kits
Sye Kits
U-joints and CV Kits
Axle Parts
Other
Store Newsletter!
Add my Shop to your Favourites and receive my email newsletters about new items and special promotions!
Sign Up Now!
4x4PartSales
4x4PartSales
Multiple Warehouses
To Better Serve You!
An Authorized Adams Driveshaft Dealer