GM Transmission Front Driveshaft Slip Yoke, 27-Spline, 5-1/2 Inch

Description

This 5-1/2" stock length slip yoke is a great replacement for stock yokes that are worn or damaged, Fits the common GM 1-3/16" x 27 splined output shafts found on GM 3 and 4 speed manual, TH350, Powerglide, 700R4, 4L60, and 200-4R transmissions, Stock length has 3 3/4" of slip length, Also fits Bert, Brinn, and Falcon transmissions, Uses 1310 U-joint with external snap rings which is very common and easy to find conversion U-joints if needed
GM Transmission Front Driveshaft Slip Yoke, 27-Spline, 5-1/2 Inch
Sku # 80292415
Mfr. Part # 80292415
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Notes
The expressed measurement or length of the slip yoke is taken from the center of the u-joint to tip, not overall. This yoke measures 5-1/2" from tip to centerline of U-joint. The machined length on the yoke is 3-3/4".
Info
Stock length (5-1/2") slip yoke for GM applications with 1-3/16" x 27-spline output shaft. Works with 1310 series U-joints.
This yoke measures 5-1/2" from tip to centerline of u-joint
This yoke is grooved for an "external" u-joint cap retaining clip
The machined length on the yoke is 3-3/4"
The expressed measurement or length of the slip yoke is taken from the center of the u-joint to tip, not overall.
Fits over the output shaft of the following transmissions:
Common GM/Saginaw 3 & 4 speed transmissions with a 1-3/16" x 27 spline output shaft
Powerglide, T-350, 700R-4, 200R-4, and 4L60 automatic transmissions
Muncie M20/M21 and Borg Warner T-5, T-10 & T-56 27-spline manual transmissions
Item Details
For 3-7/32" X 1-1/16" u-joints
Specs
Application
This Part Fits
GM apps:
( T350 ) - GM 27-spline, 1.5" OD Seal Dia., Fits Late Power Glide, Turbo 200, Turbo 350, 700R4, 4L60, 4L65, 4L70, Muncie, Saginaw, Borg Warner Trans
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
Specs
Material Type
Steel
Sold in Quantity
Each
Finish
Natural
Spline Count
27
Yoke U-Joint Series
1310
Notes
Grooved for an external U-joint cap retaining clip.
Overall Length
6.25
Shaft Diameter
1.1875
Shaft Length
3.75
MFG. Part #
80292415
Reviews
Yes
Rated
by Scooter on June 29, 2021
Summary:
Great quality awesome fit
Pros:
Perfect fit fast shipping
Yes, I recommend this product.
Perfect
Rated
by Joe on April 29, 2021
Summary:
Perfect fit
Yes, I recommend this product.
Yes I would buy this product again
Rated
by Minnesota Mad Man on November 14, 2020
Summary:
Using the product on a 53 dodge p.u. build. 350/350/9IN
Yes, I recommend this product.
Definitely
Rated
by Dkeys on October 23, 2020
Summary:
Very good product very well packaged
Yes, I recommend this product.
well made looks better than new!
Rated
by Hug on August 17, 2020
Summary:
I am mating the front 1/2 of driveshaft with rear 1/2 of my driveshaft for an odd ball build. it is going nice so far
Cons:
None
Pros:
nice piece and it fit
Yes, I recommend this product.
Related Items / Suggested Parts
GM Transmission Front Driveshaft Slip Yoke, 27-Spline, 6 Inch
Aluminum Transmission Plug
GM Transmission Front Driveshaft Slip Yoke, 27-Spline, 6-3/4 Inch
GM Transmission Front Driveshaft Slip Yoke, 27-Spline, 8 Inch
Speedway 1310 Series Chevy to Chevy U-Joint
Lubrication Engineers 3752 LE Almagard Industrial Grease, 14.5 Oz
Redline 80402 CV-2 Synthetic Grease
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.