2 in 1 CO&Smoke Alarm Carbon Monoxide Detector Warning Sensor LED Lights Flash

Description

CARBON MONOXIDE & SMOKE ALARM
Specification:
--Power supply: a 9V alkaline 6LR61 or carbon zinc battery 6F22 (not included)
--Sensitivity setting:
--CO: sensitivity and time
50PPM 60-90 minutes alarm
100PPM 10-40 minutes alarm
300PPM 3 minutes alarm
--Standby current: <100uA
--Alarm current: <75mA
--Operating environment conditions: 5-400C, 20-90% R.H.
--Color: white
Feature:
✔Carbon monoxide detection and alarm can provide safety protection for your house
✔The battery-powered equipment is easy to install or replace the battery, which can still provide you with protection during the house power outage
✔The green indicator light means normal operation, and the red light means emergency.
✔When carbon monoxide is detected, the alarm will emit four short beeps; when smoke is detected, the alarm will emit continuous beeps; when smoke and carbon monoxide are detected at the same time, the alarm will also emit continuous beeps Sex beep
What should do if the alarm rings?
1.Call your emergency services and turn off the gas appliance and gas supply system
2.Move to an outdoor area or immediately approach an open door/window. Check that everyone is safe.
3.Do not reenterthe premises nor move away from the open door /window until the emerency serices have arrived,the premises have been aired out，and your alarm remains in its normal condition.
4.Never restart the source of a CO problem until it has been fixed. NEVER IGNORE THE ALARM!
Package contains:
1 * Composite carbon monoxide smoke alarm
2 * screw
2 * Wall plug
1 * Crowbar
1 * Instruction